Kore Auto
1 / 5
Many thanks for selecting this brake fluid tester. The tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing.
Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.
Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.
Brake fluid detection pen is based on the change in conductivity to determine the moisture change in brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode; high moisture content will lead to a lower boiling point, affecting braking performance.
Water Content H2O < 1.5%
Brake fluid qualified. Green representing good condition / brake fluid lines / cell row.
Water Content H2O = 1.5% to 3%
State is acceptable. Can continue to use, test again six months later. Low moisture content.
Water Content H2O > 3%
Needs immediate replacement. Cannot continue to use. Red LED flashing indicates battery replacement is needed.
Packing List:
| 1. 1x Brake fluid tester |
| 2. Blister card package + carton box |
Shipping & Logistics Info:
Delivery Time: 3-7 working days for samples; 7-30 working days for bulk goods.
Alibaba Trade Assurance can assure all your benefits during the whole deal.
